Degradation kinetics and formation of regulated and emerging disinfection by-products during chlorination of two expectorants ambroxol and bromhexine.

Ambroxol hydrochloride (AMB) and bromhexine hydrochloride (BRO) are classic expectorants and bronchosecretolytic pharmaceuticals. In 2022, both AMB and BRO were recommended by medical emergency department of China to alleviate cough and expectoration for symptoms caused by COVID-19. The reaction characteristics and mechanism of AMB/BRO with chlorine disinfectant in the disinfection process were investigated in this study. The reaction of chlorine with AMB/BRO were well described by a second-order kinetics model, first-order in both AMB/BRO and chlorine. The second order rate reaction constant of AMB and BRO with chlorine at pH 7.0 were 1.15 × 102 M-1s-1 and 2.03 × 102 M-1s-1, respectively. During chlorination, a new class of aromatic nitrogenous disinfection by-products (DBPs) including 2-chloro-4, 6-dibromoaniline and 2, 4, 6-tribromoaniline were identified as the intermediate aromatic DBPs by gas chromatography-mass spectrometry. The effect of chlorine dosage, pH, and contact time on the formation of 2-chloro-4, 6-dibromoaniline and 2, 4, 6-tribromoaniline were evaluated. In addition, it was found that bromine in AMB/BRO were vital bromine source to greatly promote the formation of classic brominated DBPs, with the highest Br-THMs yields of 23.8% and 37.8%, respectively. This study inspired that bromine in brominated organic compounds may be an important bromine source of brominated DBPs.

Pilot Study of Pollution Characteristics and Ecological Risk of Disinfection Byproducts in Natural Waters in Hong Kong.

Increased disinfection efforts in various parts of China, including Hong Kong, to prevent the spread of the novel coronavirus may lead to elevated concentrations of disinfectants in domestic sewage and surface runoff in Hong Kong, generating large quantities of toxic disinfection byproducts. Our study investigated the presence and distribution of four trihalomethanes (THMs), six haloacetic acids (HAAs), and eight nitrosamines (NAMs) in rivers and seawater in Hong Kong. The concentrations of THMs (mean concentration: 1.6 µg/L [seawater], 3.0 µg/L [river water]), HAAs (mean concentration: 1.4 µg/L [seawater], 1.9 µg/L [river water]), and NAMs (mean concentration: 4.4 ng/L [seawater], 5.6 ng/L [river water]) did not significantly differ between river water and seawater. The total disinfection byproduct content in river water in Hong Kong was similar to that in Wuhan and Beijing (People's Republic of China), and the total THM concentration in seawater was significantly higher than that before the COVID-19 pandemic. Among the regulated disinfection byproducts, none of the surface water samples exceeded the maximum index values for THM4 (80 µg/L), HAA5 (60 µg/L), and nitrosodimethylamine (100 ng/L) in drinking water. Among the disinfection byproducts detected, bromoform in rivers and seawater poses the highest risk to aquatic organisms, which warrants attention and mitigation efforts. Environ Toxicol Chem 2022;41:2613-2621. © 2022 SETAC.

Occurrence and Transport of Isothiazolinone-Type Biocides from Commercial Products to Aquatic Environment and Environmental Risk Assessment.

This study investigated the occurrence and transport of four isothiazolinone-type biocides from commercial products to wastewater treatment plants (influents, sludges, and effluents) and to natural emissaries (upstream and downstream the wastewater treatment plants) in Romania. All four biocides were determined in personal care and household products, with the highest concentration of 76.4 µg/L OIT (2-octyl-4-isothiazolin-3-one). For environmental samples, three of the four isothiazolinones were determined, CMI (5-chloro-2-methyl-4-isothiazolin-3-one) being the prominent compound for water samples. The maximum concentration of 84.0 µg/L in influent, 122 µg/L upstream, and 144 µg/L downstream the wastewater treatment plants were obtained for CMI. Unlike water samples, in the sewage sludge samples, OIT proved to be the dominant compound, with concentration up to 5.80 µg/g d.w. The extremely high levels of isothiazolinone determined in different WWTPs from Romania may be due to the COVID-19 pandemic situation, during which a much larger amount of cleaning, hygiene, and personal care products was used. The isothiazolinone-type biocides were readily removed from the influents of the five WWTPs, with the mean removal rate up to 67.5%. The mean mass loading value for the targeted biocides based on influent was 20.4 µg/day/1000 people, while the average environmental emissions were 6.93 µg/day/1000 people for effluents. The results obtained for riverine water combine with statistical analysis showed that the anthropogenic activities are the major contamination sources of the surface waters. Preliminary ecological risk evaluation showed that BIT (1,2-benzisothiazol-3(2H)-one), OIT, and CMI could pose a very high risks to different aquatic species living in the receiving aquatic environments.

Multi-route exposure sampling of quaternary ammonium compounds and ethanol surface disinfectants in a K-8 school.

The frequency of surface disinfectant use has increased over the last several years in public settings such as schools, especially during the COVID-19 pandemic. Although these products are important for infection control and prevention, their increased use may intensify the exposure to both persons applying the disinfection product as well as bystanders. Safety assessments have demonstrated that these products, when used as intended, are considered safe for use and effective; however, point-of-contact effects (such as respiratory or dermal irritation) may still occur. Additionally, relative exposures may vary significantly due to the wide variation in disinfectant formulation and application methods. Quantitative estimations of exposures to two commonly used active ingredients, quaternary ammonium compounds (QACs) and ethanol, are not well characterized during product use and application scenarios. To assess the potential for health risks attributable to increased use in classroom settings, as well as to quantitatively evaluate the potential exposure to both ethanol and QACs, student and adult bystander surface and air measurements were collected in a K-8 school setting in Ohio, United States, over a three-day period. Direct-reading instruments were utilized to collect real-time air samples that characterized mass fraction concentrations following the use of the QAC- and ethanol-based disinfectants. Furthermore, surface and air sampling of microbial species were conducted to establish the overall bioburden and effectiveness of each disinfectant to inform the comparative risk and health effect impacts from the tested products use scenario. Both tested products were approximately equally effective at reducing bioburdens on desk surfaces. In some classrooms, concentrations of QAC congeners were significantly increased on desk surfaces following the application of the disinfectant spray; however, the magnitude of the change in concentration was small. Ethanol was not measured on surfaces due to its volatility. Airborne concentrations increased immediately following spray of each disinfectant product but rapidly returned to baseline. Each of the QAC congeners listed in the product safety data sheets were detected and measurable on desk surfaces; however, air concentrations were generally below the limit of detection. The 15-min time-weighted averages (TWAs) of both QACs and ethanol in the air were below respective health effects benchmarks, and therefore, the negative impact on health outcomes is considered to be minimal from short-term, repeated use of ethanol- or QAC-based spray products in a school setting when the products are used as directed.

The first detection of quaternary ammonium compounds in breast milk: Implications for early-life exposure.

BACKGROUND: Quaternary ammonium compounds (QACs), commonly used in cleaning, disinfecting, and personal care products, have recently gained worldwide attention due to the massive use of disinfectants during the COVID-19 pandemic. However, despite extensive use of these chemicals, no studies have focused on the analysis of QACs in human milk, a major route of exposure for infants. OBJECTIVE: Our objectives were to identify and measure QACs in breast milk and evaluate early-life exposure to this group of compounds for nursing infants. METHODS: Eighteen QACs, including 6 benzylalkyldimethyl ammonium compounds (BACs, with alkyl chain lengths of C8-C18), 6 dialkyldimethyl ammonium compounds (DDACs, C8-C18), and 6 alkyltrimethyl ammonium compounds (ATMACs, C8-C18), were measured in breast milk samples collected from U.S. mothers. Daily lactational intake was estimated based on the determined concentrations for 0-12 month old nursing infants. RESULTS: Thirteen of the 18 QACs were detected in breast milk and 7 of them were found in more than half of the samples. The total QAC concentrations (ΣQAC) ranged from 0.33 to 7.4 ng/mL (median 1.5 ng/mL). The most abundant QAC was C14-BAC with a median concentration of 0.45 ng/mL. The highest median ΣQAC estimated daily intake (EDI) was determined for <1-month old infants based on the average (using the median concentration) and high (using the 95th percentile concentration) exposure scenarios (230 and 750 ng/kg body weight/day, respectively). SIGNIFICANCE: Our findings provide the first evidence of the detection of several QACs in breast milk and identify breastfeeding as an exposure pathway to QACs for nursing infants. IMPACT STATEMENT: Our findings provide the first evidence of QAC occurrence in breast milk and identify breastfeeding as one of the exposure pathways to QACs for nursing infants.

[Pollution Characteristics and Risk Assessment of DBPs in Typical Drinking Water Sources in Wuhan Under the COVID-19 Pandemic].

In order to reveal the pollution characteristics and risk levels of DBPs in typical drinking water sources in Wuhan under the COVID-19 pandemic, 26 sampling sites were selected in typical drinking water sources in Wuhan. N,N-diethyl-1,4-phenylenediamine spectrophotometry and gas chromatograph-micro-cell electron capture detector (GC-µECD) methods were used to detect residual chlorine disinfectants and DBPs in water, respectively, and their health and ecology risks were assessed. The results showed that free chlorine or total residual chlorine were detected in 16 of the 26 water samples, and the maximum concentration was 0.04 mg·L-1, which exceeded the limit of the surface water standard in China. The concentration of residual chlorine was higher in sampling sites near the outfall of a municipal sewage plant. There were 34 types of DBPs measured in 10 sampling sites, and 24 types of substances were detected with the detection rate of 10.00%-100.00%. The ρ (total DBPs) was in the range of 0.11-104.73 µg·L-1, with an average value of 7.26 µg·L-1. The concentration of chloroform was the highest among all the DBPs, ranging from 9.98 µg·L-1 to 11.15 µg·L-1, with an average value of 10.47 µg·L-1. The concentration of 2-bromo-2-iodoacetamide was the lowest, ranging from ND-0.11 µg·L-1, with an average value of 0.01 µg·L-1. The overall detection level of the DBPs area was low in this study area, and the result of the health risk assessment showed that the DBPs had no carcinogenic or non-carcinogenic health risks to human body. However, the results of the ecological risk assessment showed that chloroform presented a high ecological risk to aquatic organisms.

Microbiological and Toxicological Hazards in Sewage Treatment Plant Bioaerosol and Dust.

Despite the awareness that work in the sewage treatment plant is associated with biological hazards, they have not been fully recognised so far. The research aims to comprehensively evaluate microbiological and toxicological hazards in the air and settled dust in workstations in a sewage treatment plant. The number of microorganisms in the air and settled dust was determined using the culture method and the diversity was evaluated using high-throughput sequencing. Endotoxin concentration was assessed with GC-MS (gas chromatography-mass spectrometry) while secondary metabolites with LC-MS/MS (liquid chromatography coupled to tandem mass spectrometry). Moreover, cytotoxicity of settled dust against a human lung epithelial lung cell line was determined with the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay and UHPLC-Q-ToF-UHRMS (ultra-high-performance liquid chromatography-quadrupole time-of-flight ultrahigh-resolution mass spectrometry) analysis was performed to determine the source of cytotoxicity. The total dust concentration in the sewage treatment plant was low and ranged from 0.030 mg m-3 to 0.044 mg m-3. The highest microbiological contamination was observed in sludge thickening building and screenings storage. Three secondary metabolites were detected in the air and sixteen in the settled dust. They were dominated by compounds typical of lichen and plants and Aspergillus, Penicillium and Fusarium genera mould. The settled dust from the sludge thickening building revealed high cytotoxicity to human lung epithelial cells A-549 (IC50 = 6.98 after 72 h). This effect can be attributed to a biocidal compound-didecyldimethylammonium chloride (DDAC-C10) and seven toxic compounds: 4-hydroxynonenal, carbofuran, cerulenin, diethylphosphate, fenpropimorph, naphthalene and onchidal. The presence of DDAC-C10 and other biocidal substances in the sewage treatment plant environment may bring negative results for biological sewage treatment and the natural environment in the future and contribute to microorganisms' increasing antibiotics resistance. Therefore, the concentration of antibiotics, pesticides and disinfectants in sewage treatment plant workstations should be monitored.

Changes in Sewage Sludge Chemical Signatures During a COVID-19 Community Lockdown, Part 1: Traffic, Drugs, Mental Health, and Disinfectants.

The early months of the COVID-19 pandemic and the associated shutdowns disrupted many aspects of daily life and thus caused changes in the use and disposal of many types of chemicals. While records of sales, prescriptions, drug overdoses, and so forth provide data about specific chemical uses during this time, wastewater and sewage sludge analysis can provide a more comprehensive overview of chemical changes within a region. We analyzed primary sludge from a wastewater-treatment plant in Connecticut, USA, collected March 19 to June 30, 2020. This time period encompassed the first wave of the pandemic, the initial statewide stay at home order, and the first phase of reopening. We used liquid chromatography-high-resolution mass spectrometry and targeted and suspect screening strategies to identify 78 chemicals of interest, which included pharmaceuticals, illicit drugs, disinfectants, ultraviolet (UV) filters, and others. We analyzed trends over time for the identified chemicals using linear trend analyses and multivariate comparisons (p < 0.05). We found trends related directly to the pandemic (e.g., hydroxychloroquine, a drug publicized for its potential to treat COVID-19, had elevated concentrations in the week following the implementation of the US Emergency Use Authorization), as well as evidence for seasonal changes in chemical use (e.g., increases for three UV-filter compounds). Though wastewater surveillance during the pandemic has largely focused on measuring severe acute respiratory syndrome-coronavirus-2 RNA concentrations, chemical analysis can also show trends that are important for revealing the public and environmental health effects of the pandemic. Environ Toxicol Chem 2022;41:1179-1192. © 2021 SETAC.

Ethanol Susceptibility of SARS-CoV-2 and Other Enveloped Viruses.

Ethanol is an effective disinfectant against the novel coronavirus SARS-CoV-2. However, its effective concentration has not been shown, and we therefore analyzed the effects of different concentrations of ethanol on SARS-CoV-2. When SARS-CoV-2 was treated with varying ethanol concentrations and examined for changes in infectivity, the ethanol concentration at which 99% of the infectious titers were reduced was 24.1% (w/w) [29.3% (v/v)]. For reference, ethanol susceptibility was also examined with other envelope viruses, including influenza virus, vesicular stomatitis virus in the family Rhabdoviridae, and Newcastle disease virus in the family Paramyxoviridae, and the 99% inhibitory concentrations were found to be 28.8%(w/w) [34.8% (v/v)], 24.0% (w/w) [29.2% (v/v)], and 13.3% (w/w) [16.4% (v/v)], respectively. Some differences from SARS-CoV-2 were observed, but the differences were not significant. It was concluded that ethanol at a concentration of 30%(w/w) [36.2% (v/v)] almost completely inactivates SARS-CoV-2.

Occurrence and Distribution of Disinfection Byproducts in Domestic Wastewater Effluent, Tap Water, and Surface Water during the SARS-CoV-2 Pandemic in China.

Intensified efforts to curb transmission of the Severe Acute Respiratory Syndrome Coronavirus-2 might lead to an elevated concentration of disinfectants in domestic wastewater and drinking water in China, possibly resulting in the generation of numerous toxic disinfection byproducts (DBPs). In this study, the occurrence and distribution of five categories of DBPs, including six trihalomethanes (THMs), nine haloacetic acids (HAAs), two haloketones, nine nitrosamines, and nine aromatic halogenated DBPs, in domestic wastewater effluent, tap water, and surface water were investigated. The results showed that the total concentration level of measured DBPs in wastewater effluents (78.3 µg/L) was higher than that in tap water (56.0 µg/L, p = 0.05), followed by surface water (8.0 µg/L, p < 0.01). Moreover, HAAs and THMs were the two most dominant categories of DBPs in wastewater effluents, tap water, and surface water, accounting for >90%, respectively. Out of the regulated DBPs, none of the wastewater effluents and tap water samples exceeded the corresponding maximum guideline values of chloroform (300 µg/L), THM4 (80 µg/L), NDMA (100 ng/L), and only 2 of 35 tap water samples (67.6 and 63.3 µg/L) exceeded the HAA5 (60 µg/L) safe limit. HAAs in wastewater effluents showed higher values of risk quotient for green algae. This study illustrates that the elevated use of disinfectants within the guidance ranges during water disinfection did not result in a significant increase in the concentration of DBPs.

Numerical and experimental analyses for the improvement of surface instant decontamination technology through biocidal agent dispersion: Potential of application during pandemic.

The transmission of SARS-CoV-2 through contact with contaminated surfaces or objects is an important form of transmissibility. Thus, in this study, we evaluated the performance of a disinfection chamber designed for instantaneous dispersion of the biocidal agent solution, in order to characterize a new device that can be used to protect individuals by reducing the transmissibility of the disease through contaminated surfaces. We proposed the necessary adjustments in the configuration to improve the dispersion on surfaces and the effectiveness of the developed equipment. Computational Fluid Dynamics (CFD) simulations of the present technology with a chamber having six nebulizer nozzles were performed and validated through qualitative and quantitative comparisons, and experimental tests were conducted using the method Water-Sensitive Paper (WSP), with an exposure to the biocidal agent for 10 and 30 s. After evaluation, a new passage procedure for the chamber with six nozzles and a new configuration of the disinfection chamber were proposed. In the chamber with six nozzles, a deficiency was identified in its central region, where the suspended droplet concentration was close to zero. However, with the new passage procedure, there was a significant increase in wettability of the surface. With the proposition of the chamber with 12 nozzles, the suspended droplet concentration in different regions increased, with an average increase of 266%. The experimental results of the new configuration proved that there was an increase in wettability at all times of exposure, and it was more significant for an exposure of 30 s. Additionally, even in different passage procedures, there were no significant differences in the results for an exposure of 10 s, thereby showing the effectiveness of the new configuration or improved spraying and wettability by the biocidal agent, as well as in minimizing the impact caused by human factor in the performance of the disinfection technology.

[Construction of Continuous Dynamic Model for River Networks and Its Application in Simulation of Spatiotemporal Migration of Typical Biocides].

Biocides are widely added to personal care products and enter the environment through sewage treatment plant (STP) discharge, which affects ecological health. This paper evaluated the pollution characteristics of triclosan and triclocarban in a river network during the COVID-19 epidemic. Moreover, a continuous dynamic river network model coupling a one-dimensional hydrodynamic model and four-level fugacity model was established to address the temporal and spatial heterogeneity of pollutants in the river network migration process; then, this model was applied to evaluate two biocides in the Shima River Basin. The model passed calibration and in-field concentration verification tests and yielded satisfactory simulation results. The results of the study showed that the concentration of biocides in the river network during the new crown epidemic was twice that of the non-epidemic period. The concentration of triclosan and triclocarban in the river channel first increased and then decreased with the increase of the river migration distance after STP discharge. The time variation characteristics of the concentrations were affected by the river flow. The biocide concentration in the river network of the low flow upstream area first increased and then decreased, gradually stabilizing in about 20 h. The pollution concentration in the high flow downstream area was increased, and the concentration did not stabilize at 24 h. These results indicate the necessity of evaluating the temporal and spatial characteristics of migration of typical biocides in the river network by stages and time on the premise of distinguishing the flow.

Nebulized CLODOS Technology Shows Clear Virucidal Properties against the Human Coronavirus HCoV-229E at Non-Cytotoxic Doses.

The emergent human coronavirus SARS-CoV-2 and its high infectivity rate has highlighted the strong need for new disinfection systems. Evidence has proven that airborne transmission is an important route of spreading for this virus. Therefore, this short communication introduces CLODOS Technology®, a novel strategy to disinfect contaminated surfaces. It is a product based on stable and 99% pure chlorine dioxide, already certified as a bactericide, fungicide and virucide against different pathogens. In this study, CLODOS Technology®, by direct contact or thermonebulization, showed virucidal activity against the human coronavirus HCoV-229E at non-cytotoxic doses. Different conditions such as nebulization, exposure time and product concentration have been tested to standardize and optimize this new feasible method for disinfection.

Direct Potentiometric Study of Cationic and Nonionic Surfactants in Disinfectants and Personal Care Products by New Surfactant Sensor Based on 1,3-Dihexadecyl-1H-benzo[d]imidazol-3-ium.

A novel, simple, low-cost, and user-friendly potentiometric surfactant sensor based on the new 1,3-dihexadecyl-1H-benzo[d]imidazol-3-ium-tetraphenylborate (DHBI-TPB) ion-pair for the detection of cationic surfactants in personal care products and disinfectants is presented here. The new cationic surfactant DHBI-Br was successfully synthesized and characterized by nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR) spectrometry, liquid chromatography-mass spectrometry (LC-MS) and elemental analysis and was further employed for DHBI-TPB ion-pair preparation. The sensor gave excellent response characteristics for CTAB, CPC and Hyamine with a Nernstian slope (57.1 to 59.1 mV/decade) whereas the lowest limit of detection (LOD) value was measured for CTAB (0.3 × 10-6 M). The sensor exhibited a fast dynamic response to dodecyl sulfate (DDS) and TPB. High sensor performances stayed intact regardless of the employment of inorganic and organic cations and in a broad pH range (2-11). Titration of cationic and etoxylated (EO)-nonionic surfactant (NSs) (in Ba2+) mixtures with TPB revealed the first inflexion point for a cationic surfactant and the second for an EO-nonionic surfactant. The increased concentration of EO-nonionic surfactants and the number of EO groups had a negative influence on titration curves and signal change. The sensor was successfully applied for the quantification of technical-grade cationic surfactants and in 12 personal care products and disinfectants. The results showed good agreement with the measurements obtained by a commercial surfactant sensor and by a two-phase titration. A good recovery for the standard addition method (98-102%) was observed.

3,3',5,5'-tetramethylbenzidine as multi-colorimetric indicator of chlorine in water in line with health guideline values.

Sanitizing solutions against bacterial and viral pathogens are of utmost importance in general and, in particular, in these times of pandemic due to Sars-Cov2. They frequently consist of chlorine-based solutions, or in the direct input of a certain amount of chlorine in water supply systems and swimming pools. Colorimetry is one of the techniques used to measure the crucial persistence of chlorine in water, including household chlorine test kits commonly based on colorimetric indicators. Here, we show a simple and cheap colorimetric method based on 3,3',5,5'-tetramethylbenzidine (TMB), commonly used as chromogenic reagent for enzyme-linked immunosorbent assays. TMB is converted by chlorine to a colored molecule through a pH-dependent multi-step oxidation process where the chromaticity of TMB is directly proportional to chlorine content. This molecule offers several advantages over other commonly used reagents in terms of safety, sensitivity, and, peculiarly, hue modulation, giving rise to the detection of chlorine in water with a multi-color change of the indicator solution (transparent/blue/green/yellow). Moreover, through the appropriate setting of reaction conditions, such coloration is finely tunable to cover the range of chlorine concentration recommended by international health agencies for treatment of drinking water and swimming pools and to test homemade solutions prepared by dilution of household bleach during health emergency events such as during the current pandemic. Graphical abstract.